Tag not found.
construction-baukran

Construction

Application Areas

From the roof to the foundation, and from protecting ancient national treasures to building the cities of the future, Evonik has products and solutions for use in almost all aspects of construction.


  • AMICURE 101
    Amicure 101 curing agent for epoxy resins is a proprietary, non-MDA aromatic amine.
  • AMICURE IC-20
    Amicure IC-20 is an amine curing agent specifically designed to cure with standard HDI Trimer or Biuret Isocyanates.
  • AMICURE IC-221
    Amicure IC-221 is an amine curing agent specifically designed for polyisocyanate resins.
  • AMICURE IC-321
    Amicure IC-321 is an amine curing agent specifically designed for polyisocyanate resins.
  • AMICURE IC-322
    Amicure IC-322 curative is an amine curing agent specifically designed to cure with standard HDI Trimer or Biuret  socyanates for thin-film commercial and industrial flooring applications up to 20 mils.
  • AMICURE IC-40
    Amicure IC-40 is an amine curing agent specifically designed to cure with standard HDI Trimer or Biuret Isocyanates.
  • AMICURE PACM
    Amicure PACM curing agent is a liquid unmodified cycloaliphatic amine; bis-(p-aminocyclohexyl) methane.
  • ANCAMIDE 2050
    Ancamide 2050 curing agent is a special polyamide adduct designed for use with liquid epoxy resins in two-part, ambient-cure coatings.
  • ANCAMIDE 2353
    Ancamide 2353 curing agent is a high-performance modified polyamide intended for use with epoxy resins in two-part ambient cure coatings.
  • ANCAMIDE 2396
    Ancamide 2396 curing agent is a modified amidoamine intended for use at ambient temperature with liquid epoxy resins.
  • ANCAMIDE 2424
    Ancamide 2424 curing agent is a high performance, modified polyamide optimized for use with liquid epoxy resins in twocomponent structural adhesives.
  • ANCAMIDE 2443
    Ancamide 2443 curing agent is a modified amidoamine designed to be used with liquid epoxy resins.
  • ANCAMIDE 2739
    Ancamide 2739 curing agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10°C).
  • ANCAMIDE 2767
    Ancamide 2767 curing agent is a high performance modified polyamide intended for use with epoxy resins in two-part ambient cure coatings.
  • ANCAMIDE 502
    Ancamide 502 and Ancamide 506 curing agents are amidoamines designed for curing liquid epoxy resins at ambient or elevated temperatures.
  • ANCAMIDE 506
    Ancamide 502 and Ancamide 506 curing agents are amidoamines designed for curing liquid epoxy resins at ambient or elevated temperatures.
  • ANCAMIDE 512
    Ancamide 512 is an aliphatic amidoamine curing agent designed for use with liquid epoxy resin at ambient or elevated temperatures.
  • ANCAMINE AEP
    Ancamine AEP curing agent is a 96% minimum purity grade of N-aminoethyl-piperazine, designed for use as a curing agent for liquid epoxy resins.
  • ANCAMINE 1608
    Ancamine 1608 is a modified aliphatic polyamine adduct curing agent designed for use as an ambient temperature curing agent for epoxy resin.
  • ANCAMINE 1618
    Ancamine 1618 curing agent is a low color, low viscosity modified cycloaliphatic amine intended for ambient or low temperature curing of liquid epoxy resins.
  • ANCAMINE 1637-LV
    Ancamine® 1637-LV is a low viscosity version of Ancamine 1637.
  • ANCAMINE 1638
    Ancamine® 1638 curing agent is a modified aliphatic amine designed for use with liquid epoxy resin cured at ambient or elevated temperature.
  • ANCAMINE 1767
    Ancamine 1767 curing agent is a modified aliphatic amine used to cure liquid epoxy resins at ambient or low temperatures.
  • ANCAMINE 2089M
    Ancamine 2089M curing agent is a modified aliphatic amine for use as an ambient temperature curing agent for liquid epoxy resins.
  • ANCAMINE 2205
    Ancamine 2205 curing agent is an accelerated modified aliphatic amine curative intended for use with liquid epoxy resins in two-part ambient or low-temperature cure systems.
  • ANCAMINE 2264
    Ancamine 2264 is an epoxy curing agent with both cycloaliphatic and aromatic character.
  • ANCAMINE 2280
    Ancamine 2280 curing agent is a low-viscosity modified cycloaliphatic amine designed for use with liquid epoxy resins in two-package formulations.
  • ANCAMINE 2286
    Ancamine 2286 is a very low viscosity modified cycloaliphatic amine curing agent intended for ambient or low temperature cure of liquid epoxy resins.
  • ANCAMINE 2390
    Ancamine 2390 curing agent is a low viscosity modified amine designed to be used with liquid epoxy resin.
  • ANCAMINE 2423
    Ancamine 2423 curing agent is a low-color cycloaliphatic amine adduct intended for use with liquid epoxy resins.
  • ANCAMINE 2432
    Ancamine 2432 curing agent is a modified aliphatic amine intended for use with liquid epoxy resins.
  • ANCAMINE 2519
    Ancamine 2519 is a modified cycloaliphatic polyamine intended for use as an ambient curing agent for liquid epoxy resin.
  • ANCAMINE 2605
    Ancamine 2605 curing agent is a modified cycloaliphatic polyamine intended for use as a room temperature curing agent for liquid epoxy resin.
  • ANCAMINE 2641
    Ancamine 2641 curing agent is an accelerated modified aliphatic amine curative intended for use with liquid epoxy resins in two-part ambient or low-temperature cure systems.
  • ANCAMINE 2659
    Ancamine 2659 curing agent is a low color, low viscosity modified cycloaliphatic amine intended for ambient or low temperature curing of liquid epoxy resins.
  • ANCAMINE 2712M
    Ancamine 2712M curing agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10°C).
  • ANCAMINE 2726
    Ancamine 2726 curing agent is a modified cycloaliphatic amine adduct intended for use at ambient temperatures with liquid epoxy resins.
  • ANCAMINE 2800
    Ancamine 2800 is a modified polyamine intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application.
  • ANCAMINE 2803
    Ancamine 2803 is a modified polyamine curing agent intended for fast cure, high elongation and hardness epoxy application.
  • ANCAMINE K54
    Ancamine K54 curing agent is a technical grade of tris- (dimethylaminomethyl) phenol—a versatile Lewis Base catalyst for curing epoxy resins.
  • ANCAMINE TEPA
    Ancamine TEPA curing agent is a standard commercial grade of tetraethylene pentamine.
  • ANCAMINE TETA
    Ancamine TETA curing agent is a standard commercial grade of triethylenetetramine.
  • ANCAREZ AR555
    Ancarez AR555 resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water.
  • ANQUAMINE 701 / EPILINK 701
    Anquamine 701 /Epilink 701 is a water-based epoxy curing agent that lets you create unique microporous systems that are breathable and water vapor permeable preventing delamination and blistering.
  • ANQUAMINE 287
    Anquamine 287 curing agent is a novel water-based epoxy curing agent designed for use in two part epoxy systems with standard liquid and modified liquid epoxy resins without the addition of emulsifiers.
  • ANQUAMINE 360 / EPILINK 360
    Anquamine 360 / Epilink 360 curing agent is a modified polyamide curing agent designed for use with liquid epoxy resins in two-component, ambient-cure, waterborne epoxy coatings.
  • ANQUAMINE 401
    Anquamine 401 waterborne curing agent is a modified aliphatic amine supplied at 70% solids in water.
  • ANQUAMINE 721
    Anquamine 721 waterborne curing agent is a modified amine curing agent designed for use in waterborne epoxy coatings where cost effectiveness and high performance are key requirements.
  • ANQUAWHITE 735
    Anquamine 735 curing agent is a water-based curing agent specifically designed for standard liquid epoxy resin.
  • ANQUAWHITE 100
    Anquawhite 100 curing agent is a novel waterborne curing agent dispersion designed for use in ambient or heat cure two part epoxy systems.
  • EPODIL 741
    Epodil 741 reactive diluent is a technical grade of butyl glycidyl ether.
  • EPODIL 742
    Epodil 742 reactive diluent is cresyl glycidyl ether (CGE). It is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems.
  • EPODIL 746
    Epodil 746 reactive diluent is an aliphatic glycidyl ether, specifically 2-ethylhexyl glycidyl ether (EHGE).
  • EPODIL 748
    Epodil 748 reactive diluent is an aliphatic glycidylether, comparable to Epoxide 8.
  • EPODIL 749
    Epodil 749 is neopentyl glycol diglycidyl ether used to reduce the viscosity of epoxy resin systems.
  • EPODIL 750
    Epodil 750 reactive diluent is a technical grade of the diglycidyl ether of 1,4-butanediol.
  • EPODIL 757
    Epodil 757 reactive diluent is a technical grade of the glycidyl ether of cyclohexane dimethanol.
  • EPODIL 759
    Epodil 759 reactive diluent is an aliphatic glycidyl ether (C12–C13).
  • EPODIL 777
    Epodil 777 reactive diluent is a diglycidyl ether of polypropylene glycol intended for epoxy resins systems.
  • EPODIL LV5
    Epodil LV5 diluent is a chemically inert, low viscosity liquid hydrocarbon resin.
  • HYBRIDUR 580
    Hybridur 580 Pis an anionically stabilized urethane-acrylic hybrid polymer from Evonik.
  • VESTAMIN A 139
    VESTAMIN A 139 is a liquid, blocked crosslinker for polyisocyanate resins based on a cycloaliphatic diamine. As supplied the product exhibits a very low reactivity towards isocyanate groups.
  • VESTAMIN IPD
    VESTAMIN IPD is a cycloaliphatic diamine, based on isophorone chemistry. It is a mixture of two stereo-isomers of 3-aminomethyl-3,5,5- trimethylcyclohexylamine, and is a colorless low viscosity liquid with a faint amine odor.
  • VESTAMIN PACM
    VESTAMIN PACM is a cycloaliphatic diamine which is manufactured by hydrogenation of methylene dianiline.
  • VESTAMIN TMD
    VESTAMIN TMD is a branched aliphatic diamine. It is a colorless liquid with approximately equal parts of the 2,2,4- and 2,4,4-trimethyl hexamethylene diamine isomers.
  • VESTANAT B 1358 A
    VESTANAT B 1358 A is a blocked, cycloaliphatic polyisocyanate. It is supplied as a 63 % solution in Solvesso 100*.
  • VESTANAT B 1358/100
    VESTANAT B 1358/100 is a solvent-free, blocked polyisocyanate, based on isophorone diisocyanate (VESTANAT IPDI). It is supplied in flakes.
  • VESTANAT B 1370
    VESTANAT B 1370 is a blocked, cycloaliphatic polyisocyanate. It is supplied as a solution of 60 % in n-butyl-acetate/xylene.
  • VESTANAT EP-DS 1076
    VESTANAT EP-DS 1076 is a blocked polyisocyanate dispersed in water without any additional solvent. It is based on the cycloaliphatic VESTANAT IPDI (Isophorone diisocyanate).
  • VESTANAT EP-DS 1205
    VESTANAT EP-DS 1205 is a blocked polyisocyanate based on the cycloaliphatic VESTANAT IPDI (Isophoronediisocyanate) emulsified in water without any auxiliary solvents.
  • VESTANAT EP-HP 2333
    VESTANAT EP-HP 2033 is a solvent free, hydrophilic polyisocyanate based on hexamethylene diisocyanate.
  • VESTANAT EP-M 222
    Solvent based polyfunctional methoxysilane which can be used as a co-crosslinker to increase the flexibility of stoving, highly scratch resistant enamles.
  • VESTANAT EP-M 95
    Silane crosslinker used in combination with suitable acrylic or polyester resins to formulate highly scratch resistant pigmented or clear coatings.
  • VESTANAT EP-MF 201
    Solvent free, and ready catalyzed crosslinker used as sole binder or in combination with appropriate resins for fast ambient temperature curable scratch resistant coatings.
  • VESTANAT EP-MF 202
    Flexibilizer in combination with VESTANAT EP-MF 201
  • VESTANAT H12-MDI
    Aliphatic and cycloaliphatic diisocyanates like VESTANAT H12MDI are less reactive than aromatic diisocyanates. To accelerate the urethane reaction tin catalysts (e.g. DBTDL or DBTDAc) are recommended.
  • VESTANAT HB 2640 LV
    VESTANAT HB 2640 is an aliphatic polyisocyanate and comprises the biuret of hexamethylene diisocyanate (VESTANAT HDI). It provides a functionality of 3 to 4. VESTANAT HB 2640 is available as solvent grades as well as solvent free.
  • VESTANAT HB 2640 MX
    VESTANAT HB 2640 is an aliphatic polyisocyanate and comprises the biuret of hexamethylene diisocyanate (VESTANAT HDI). It provides a functionality of 3 to 4. VESTANAT HB 2640 is available as solvent grades as well as solvent free.
  • VESTANAT HB 2640/100
    VESTANAT HB 2640 is an aliphatic polyisocyanate and comprises the biuret of hexamethylene diisocyanate (VESTANAT HDI). It provides a functionality of 3 to 4. VESTANAT HB 2640 is available as solvent grades as well as solvent free.
  • VESTANAT HT 2500 L
    VESTANAT HT 2500 is an aliphatic polyisocyanate based on hexamethylene diisocyanate (VESTANAT HDI). It contains isocyanurate groups and has a functionality of 3 to 4.
  • VESTANAT HT 2500 LV
    VESTANAT HT 2500 is an aliphatic polyisocyanate based on hexamethylene diisocyanate (VESTANAT HDI). It contains isocyanurate groups and has a functionality of 3 to 4.
  • VESTANAT HT 2500/100
    VESTANAT HT 2500 is an aliphatic polyisocyanate based on hexamethylene diisocyanate (VESTANAT HDI). It contains isocyanurate groups and has a functionality of 3 to 4.
  • VESTANAT IPDI
    VESTANAT IPDI is a cycloaliphatic diisocyanate and as such a prefered raw material for the synthesis of lightstable and weather-resistant polyurethanes. It is a low-viscosity liquid with a weak but specific odour.
  • VESTANAT T 1890 E
    VESTANAT T 1890 is a cycloaliphatic polyisocyanate based on isophorone diisocyanate (VESTANAT IPDI). It contains isocyanurate groups and has a NCO-functionality between 3 and 4.
  • VESTANAT T 1890 L
    VESTANAT T 1890 is a cycloaliphatic polyisocyanate based on isophorone diisocyanate (VESTANAT IPDI). It contains isocyanurate groups and has a NCO-functionality between 3 and 4.
  • VESTANAT T 1890 M
    VESTANAT T 1890 is a cycloaliphatic polyisocyanate based on isophorone diisocyanate (VESTANAT IPDI). It contains isocyanurate groups and has a NCO-functionality between 3 and 4.
  • VESTANAT T 1890/100
    VESTANAT T 1890/100 is a cycloaliphatic polyisocyanate based on isophorone diisocyanate (VESTANAT IPDI). The basic structure is the isocyanurate ring, its NCO-functionality is between 3 and 4. VESTANAT T 1890/100 is a solvent-free material.
  • VESTANAT TMDI
    VESTANAT TMDI is an aliphatic diisocyanate, methyl group branched. It represents a mixture of the 2,2,4- and 2,4,4-trimethyl-hexamethylene diisocyanate (about 1 : 1).
Page  1 2 3 4 5